It is important to know that during the shipping and installation process frameless cabinetry can get out of adjustment. This is very normal and not a defect in the cabinetry. It is the installer's job to be aware of this and to make the necessary adjustments.

It is very important BEFORE your cabinets are installed, to remove ALL doors and drawers from their bases. Prior to doing this, use painters tape to mark each base, door, and drawer so you can replace each piece to its original place. Make sure you place the drawers  and doors in a clean, dry, and safe location.

Make sure the doors and drawers are removed during the installation of countertops and appliances.

Once everything is installed, it is time to hang and adjust the doors and adjust drawer fronts.

Most frameless cabinets have a six way adjustable hinges. (click on link for instructions)

For drawer adjustments: Always drill for handles or knobs after all drawers are installed and adjusted properly. Always start from the bottom drawer and work up. Loosen screws; this allows you to move the drawer front into position. The gaps between both the drawer fronts and between the fronts and the countertop should be approximately 1/8".

 

To the top of this page

HOME | SERVICES | PRODUCTS | WOOD CHARACTERISTICS l PORTFOLIO  
TESTIMONIALS l WOOD-MODE FINISHES l DIRECTIONS | THINGS YOU SHOULD KNOW | SITE DIRECTORY